Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames both the seat and back of the supports, with a steel folding hinge at the rear of the seat. Over these frames are stretched rubber bands that serve to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which enables users to adjust the lumbar curvature and position to provide themselves with optimally-placed support.

The Cutout Sacro-Ease Seat Support features the primary steel base and rubber band structure with a cover of high quality durable upholstery. The modified seat portion is padded with a 1" layer of standard poly foam but features a 2.5" wide x 9" deep "foam-free" Coccyx cutout that provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The underside of the seat is a durable, non-skid material that keeps the Sacro-Ease firmly in place on all seats. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.

A convenient handle facilitates transport between locations when the seat support is folded. The Cutout model is specifically designed for applications where pressure on the Coccyx needs to be reduced. The cushioning effect of the stretched rubber band is supplemented by the 1" thick layer of poly foam cushioning with the pressure relief being offered by the coccyx zone cutout. Those who have a higher degree of sensitivity may derive greater benefit from one of the other SacroEase Seating options that feature thicker or different types of foam. The back features a curved foam lumbar pad that is easily adjusted to any height along the back and can be used to enhance and provide cushioning over the lumbar curve of the steel frame.
Please Note: There is no foam padding in the back of this model, only on the seat and in the foam lumbar pad.

Les Sacro-Ease Seat Supports de McCarty's Sacroease ont été conçus à l'origine, il y a plus de 70 ans, pour "reconstruire" le support qui se perd avec le vieillissement des coussins de siège et des structures de support. Ils permettent également d'améliorer la fonctionnalité des chaises de bureau ou des sièges inconfortables dans les transports en commun. Construits pour durer et surpasser les autres solutions disponibles, tous les modèles de Sacro-Ease Seat Supports reposent sur la même base qui les a toujours distingués des autres options disponibles. Une bande d'acier de 1/8po d'épaisseur et de 1po de largeur encadre le siège et le dossier des supports, avec une charnière pliante en acier à l'arrière du siège. Par-dessus ces cadres, des bandes de caoutchouc tendues servent à absorber les vibrations lors de déplacements sur des terrains mauvaises ou à offrir un coussin résistante lorsque l'on s'assis sur des sièges qui ne sont plus aussi souples qu'autrefois. Le cadre en acier est pliable, ce qui permet aux gens d'ajuster la courbure et la position des lombaires afin de bénéficier d'un support optimal.

Le Cutout Sacro-Ease Seat Support présente la structure primaire en acier et en bandes de caoutchouc avec une couverture de rembourrage durable de haute qualité. La partie modifiée du siège est rembourrée d'une couche d'un pouce de mousse de polyuréthane standard, mais comporte une découpe du coccyx de 2.5po de large sur 9po de profondeur, sans mousse, qui soulage la pression pour les personnes souffrant de blessures au coccyx ou d'autres conditions qui génèrent une sensibilité similaire à la pression. Le dessous du siège est un matériau durable et antidérapant qui maintient le Sacro-Ease fermement en place sur tous les sièges. Il est disponible dans la largeur standard de 15po mais est également disponible par commande spéciale dans une largeur de 12po qui convient aux sièges "bucket seats" plus étroits ou une largeur de 19po pour les sièges "bench seat". Des sièges plus profonds sont également disponibles par commande spéciale.

Une poignée pratique facilite le transport entre les lieux lorsque le support de siège est replié. Le modèle Cutout est spécialement conçu pour les applications où la pression sur le coccyx doit être réduite. L'effet de coussin de l'élastique étiré est complété par une couche de mousse de polyéthylène de 1po d'épaisseur, le soulagement de la pression étant assuré par la découpe de la zone du coccyx. Les personnes qui ont un degré de sensibilité plus élevé peuvent tirer un plus grand bénéfice de l'une des autres options de SacroEase Seating qui présentent des mousses plus épaisses ou différentes. Le dossier est doté d'un coussin lombaire en mousse incurvé qui se règle facilement à n'importe quelle hauteur le long du dossier et peut être utilisé pour améliorer et amortir la courbe lombaire du cadre en acier. Veuillez noter: Il n'y a pas de rembourrage en mousse dans le dos de ce modèle, seulement sur le siège et dans le coussin lombaire en mousse.

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames both the seat and back of the supports, with a steel folding hinge at the rear of the seat. Over these frames are stretched rubber bands that serve to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which enables users to adjust the lumbar curvature and position to provide themselves with optimally-placed support.

The Memory Foam Tapered Seat Sacro-Ease Seat Support offers the highest degree of cushioning and comfort of any Sacro-Ease product. The wedge-shaped seat is designed to "fill" the dip that exists at the rear of many auto and truck seats. The tapered seat design also offers ergonomic benefits by elevating the hips which in turn helps to tilt the pelvis forward and restore the natural C-Curve of the spine. When correctly aligned the spine is able to better absorb impact and is also less susceptible to injury.

As with other Sacro-Ease models, the tapered seat version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery. The backrest is padded with a 1" layer of high quality Visco-Elastic Comfort Memory Foam that offers superior cushioning and vibration damping. The Memory Foam also contours to the body to aid in reducing potential pressure points. The wedge-shaped seat tapers from 1" thick at the front to 3" thick at the rear. The seat cushion is comprised of two layers, the upper being a 1" layer of Comfort Memory Foam (the same as the backrest), with an underlying wedge of high density poly foam that tapers up to 2" thick at the rear. The combined rear thickness of 3" is ideal cushioning for applications where extremely rough conditions are experienced.

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations when the seat support is folded. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.


Note: If this Sacro-Ease Seat Support is to be used in a vehicle with limited headroom please be aware that even when compressed this seat could elevate the user up to 2".

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

The Memory Foam Tapered Sacro-Ease Seat Support offers the highest degree of cushioning and comfort of any Sacro-Ease product. This "Seat Only" model is wedge-shaped to "fill" the dip that exists at the rear of many auto and truck seats. The tapered seat design also offers ergonomic benefits by elevating the hips which in turn helps to tilt the pelvis forward and restore the natural C-Curve of the spine. When correctly aligned the spine is able to better absorb impact and is also less susceptible to injury.

As with other Sacro-Ease models, this tapered seat version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery. The wedge-shaped seat tapers from 1" thick at the front to 3" thick at the rear. The seat cushion is comprised of two layers, the upper being a 1" layer of high quality Visco-Elastic Comfort Memory Foam that offers superior cushioning and vibration damping. The Memory Foam also contours to the body to aid in reducing potential pressure points. The upper layer of Memory foam is supported by an underlying wedge of high density poly foam that tapers up to 2" thick at the rear. The combined rear thickness of 3" is ideal cushioning for applications where extremely rough conditions are experienced

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. The RSCTW-18-SPECIAL-BLK (stocked) model is the standard 15" width but has an 18" deep seat for use in common fleet truck models equipped with deeper seats than most other vehicles. Other seat width and depth combinations are also available by Special Order.


Note: If this Sacro-Ease Seat Support is to be used in a vehicle with limited headroom please be aware that even when compressed this seat could elevate the user up to 2".

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames both the seat and back of the supports, with a steel folding hinge at the rear of the seat. Over these frames are stretched rubber bands that serve to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which enables users to adjust the lumbar curvature and position to provide themselves with optimally-placed support.

The Sacro-Ease Super Deluxe 2000 Seat Support is designed specifically for use on vehicle seats, especially narrow buckets with limited space between the side bolsters on the seat and back. As seats age it can become very easy to slouch into them, with the back rounding out to a C-Curve that can put extreme load on the lower back. The Super Deluxe 2000 model "fixes" the sagging by providing a support that no longer "sags". The hinged steel frame keeps users firmly positioned in a correct upright posture. By adjusting the curve of the frame to optimize the lumbar support each user can customize the seat support to meet their specific needs. A height adjustable lumbar pad can be used to further enhance the lumbar curve.

The Super Deluxe 2000 model features the primary steel base and rubber band structure with a cover of high quality durable upholstery. Both the seat and back rest are padded with a 1" layer of standard poly foam. The cushioning effect of the foam padding is enhanced by quilting that also creates a 3-D surface that is better suited to extended sitting than a flat surface. The seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats.

The frame on the Super Deluxe 2000 is narrower than other stocked models —the seat is just 12" x 12"—so that it can fit between the bolsters on deeper or narrower bucket seats. The back rest frame is only 10.5" wide to ensure that it sits flush against the backrest on the narrowest of seats. The quilted padded "wings" extend several inches past the frame on all edges to ensure a comfortable transition from Seat Support to bucket seat.

A convenient handle facilitates transport between locations when the seat support is folded. Although the Super Deluxe 2000 model is designed specifically with automotive use in mind, it can be effective wherever support, shock absorbance, and comfort are being considered.

The Aidata Back Support consists of a formed high-density polyurethane foam pad over a plastic frame. The result is a "one-size fits all" cushioned back support with a high degree of firmness. Adjustable straps secure the back support in place over most chairs and seats. The removable and washable cover makes cleaning easy.

Note: Individuals with broader frames may find the firmness of the concave edges on the support less than ideal for comfort. Due to the nature of this product we cannot offer our 30 day customer satisfaction guarantee on this product and there is no warranty on this product.

Sacro-Ease Seat Supports from McCarty's Sacroease were initially designed over 70 years ago to "rebuild" the support that is lost as seat cushioning and supporting structures age. They also serve well to improve the functionality of low cost office chairs or uncomfortable mass transit seating. Built to outlast and outperform other available solutions, all models of the Sacro-Ease Seat Supports feature the same foundation that has always set them apart from other available options. A 1/8" thick by 1" wide steel band frames the seat. Over this frame is stretched a wide rubber band that serves to absorb vibration when travelling over rough terrain or to provide a cushioning resistance when sitting on seats that are no longer as supportive as they once were. The steel frame is bendable which permits users to customize for optimum comfort.

As a "Seat Only" model, the RX Cutout Seat is designed for chairs that offer good back support but lack a comfortable seat. This modified seat is padded with a 1" thick layer of firm poly foam and features a 2.5" wide x 9" deep "foam-free" Coccyx cutout that provides pressure relief for those suffering from tailbone injuries or other conditions that generate similar sensitivity to pressure. The 15" W x 16" D seat will fit the majority of chairs or vehicle seats. As with other Sacro-Ease models, this Coccyx cutout version includes the primary steel base and rubber band structure with a cover of high quality durable upholstery.

The underside of the seat features a durable, non-skid bottom that keeps the Sacro-Ease firmly in place on all seats. A convenient handle facilitates transport between locations. It is stocked in the standard 15" seat width but is also available by Special Order in a 12" width that works with narrower bucket seats or a 19" width for bench seats or larger users. Deeper seats are also available by Special Order.

The Beverage Holder Accessory from ErgoVerse gives GIGCHR users a convenient way of keeping a beverage up off the floor and within easy reach. This accessory can also be used on the MVMNT Foldable Perching Saddle Seat and the FYLDST Foldable Leaning Stool.

Note: Installation of the Beverage Holder Accessory requires the purchase of the Double Adapter Accessory Mount (GPS-ACC-90007) which can accommodate two separate accessories.

The Double Adapter Accessory Mount from ErgoVerse provides GIGCHR users with a means of mounting either one or two of the available Guitar Stand and Beverage Holder accessories. This adapter can also be used on the MVMNT Foldable Perching Saddle Seat and the FYLDST Foldable Leaning Stool.

The Guitar Stand Accessory from EgoVerse provides GIGCHR users with a convenient way of keeping their guitar safely supported without the requirement of a separate guitar stand. This accessory can also be used on the MVMNT Foldable Perching Saddle Seatr and the FYLDST Foldable Leaning Stool.

Note: Installation of the Guitar Stand Accessory requires the purchase of the Double Adapter Accessory Mount (GPS-ACC-90007) which can accommodate two separate accessories.

Tired of sitting in terrible seats and getting up with a sore back? That can be a thing of the past with the Chair Makeover from McCarty's Sacroease. This unique product combines two products into a unique package. The seat is a specially contoured and molded Visco Memory Foam (17" W X 16" D) designed to optimize your sitting comfort while the 24" H X 17" W back is designed with the same bendable steel frame, rubber webbing and Memory Foam as the Sacro-Ease Memory Foam Seat Support. Over all this there is a soft and flexible fabric covering available in a wide range of designer colours. The 24" high back enables you to custom bend the back to provide yourself with the lumbar and shoulder support that you require and provides a level of support not found in many office chairs. Like other Sacro-Ease Seat Supports, the Chair Makeover has a handle to enable you to transport it between locations and, also like other models, can be used in virtually all seating situations to vastly improve the back support which is so often lacking.