The DocuRite Multi-Position Document Holder and Writing Slope from Posturite combines the functions of an inline document holder and writing surface. It is placed centrally, between the keyboard and monitor. The large surface (19.5" W x 12" D) provides plenty of space on which to store documents for easy access and notation. A lever-operated eccentric cam system lets the angle be increased by elevating the rear to three different heights. In addition a "stepped" front edge accommodates 4 levels of cantilever over the front edge of the desk for locations where a keyboard tray is in use. This offers further options for increasing the angle of the document surface as well as permitting the writing surface to be drawn almost three inches closer.

The DocuRite is made of 5mm thick acrylic which creates a firm writing surface with a frosted finish that ensures potential for glare is reduced. The lightweight construction also means the DocuRite can be easily repositioned as needed. A padded wrist rest doubles as a document ledge.

If overreaching is a concern the MultiRite, also from Posturite, permits the entire writing surface to be drawn forward over the keyboard, positioning the materials directly in front of the torso and providing support for the hand and arm when writing, thereby reducing the strain on the shoulder.

The two-in-one design of the Gel Mouse Pad and Document Holder keeps the mouse, and up to five sheets of reference materials, within the user's Comfort Zone. Measuring 13" x 7.5" x 10", the mouse pad requires little space on the desk top. A clip at the top of the flip-up document holder secures papers, and a non-skid base and cable management feature help to keep the work space organized. The mouse pad also features a gel-filled, lycra-covered palm support.

NoteWe are unable to offer our 30 Day Customer Satisfaction guarantee on this product.

This desktop stand from Aidata is designed primarily as a bookholder but can easily be rotated into a vertical copyholder. Two adjustable page holders expand to accommodate thicknesses up to .75", keeping books open to the desired location. The 10" wide book ledge extends a full 1" from the middle and tapers back from that point. A convenient rotating stand permits an exceptionally wide range of viewing angles in both book and document orientations and the large, anti-slip rubber ball feet ensure stable positioning at all angles. While not designed specifically as a copyholder it does have clips incorporated both top and bottom which lets thinner documents be inserted and held securely.

The Atlas Ultra book holder from Dainoff Designs is a portable version of the Standard Atlas Book Holder. The efficient design of the Atlas Ultra means that it can serve well as a document holder, a book holder, or even as a tablet or laptop holder. This makes it a versatile accessory for any workstation.

The Atlas Ultra has two fixed settings of 15° and 30° off the vertical, permitting each person to choose the viewing angle best suited to their work and height. The modular designs means it can easily be assembled and disassembled in 30 seconds. In order to create this more compact version of the Atlas Book Holder the Atlas Ultra is machined from high density rigid Trespa or Formica. Two short and two long metal dowel page stoppers (not shown) are included to ensure that books and binders stay open at the correct page. The height adjustable shelf features 22 stopper holes in order to accommodate the widest range of books and documents.

The Copy Holder from Humanscale is a storable in-line document holder. The sturdy powder coated steel base provides storage for the copy holder as well as acting as a 1.75" monitor riser. At 10 lbs it is easily able to provide support for bulky documents or even smaller books. The copy holder itself is angle adjustable, can be lowered up to 3.5" below the work surface, and can be extended forward up to 9" from the storage base. Glide tracks enable easy storage of the document holder and the attached magnifying line guide while a simple latch release permits the document plate to be lowered.

• Premier Inline Document Support for any monitor
• Raises monitor 1"
• Can be combined with other VuRyte monitor risers (VUR-2455, VUR-4855, & VUR-4800) for monitor elevations greater than 1"
• Easel expands to 11" in height and collapses to 6"
• Monitor riser base is 11.25" x 11.25"
• Document holder extends from 3.25" to 8.5" from front of monitor riser base
• At full extension the easel extends 3.25" below monitor riser mounting surface
• Document holder adjusts in angle (0 - 90 degrees)
• Dry erase marker and notes included

The Copy Stand Basic from Humanscale is a freestanding document holder that can be used in-line with the monitor and keyboard. This reduces the need to twist the neck while reading documents. Made of powder-coated steel, the Copy Stand Basic is sturdy, durable, and easy to adjust.

The MultiLite Adjustable Document Holder from Posturite is constructed of durable lightweight frosted acrylic for ease of movement. This stylish desktop solution offers features and benefits very similar to the well-established metal-framed MultiRite Document Holder and Writing Slope. When placed on the desk between the keyboard and monitor, the MultiLite keeps reference materials and handwriting projects centered within the comfort zone. Because this reduces the need to twist or reach, while also providing stable support for the hand and arm, this multifunctional accessory offers significant ergonomic benefits to those whose job involves reading, handwriting or jotting down notes at a computer workstation.

The pull-down writing easel on the MultiLite supports sheets of paper, heavy binders or books, while positioning them all at a comfortable angle for viewing. This surface is made of rigid frosted acrylic with a 0.5" high by 0.75" deep soft foam strip that serves as a wrist pad as well as a document lip to keep loose papers in place. Gliding on smooth ball bearing tracks, the easel can also be drawn down up to 6.5" closer to the torso, providing a spacious, stable writing surface that floats above the keyboard, and eliminating the need to reach over the keyboard when handwriting. When the handwriting task is complete, the easel easily slides back into its original position where it is secured magnetically. Silicone rubber feet on the base prevent the MultiRite from shifting on the desk during use and a storage compartment integrated into the base beneath the tray keeps pens, pencils, paper clips and other small desk essentials close at hand.

The MultiLite offers 3 angle settings for the worksurface - 12°, 16°, and 21°. Those looking for a greater range of angle adjustment (up to 33°) may be interested in the metal-framed MultiRite Document Holder and Writing Slope which features the same adjustable writing surface and is available in 3 different widths.

The Document Wedge from 3M holds documents vertically for easy viewing, helping reduce neck and eye strain by supporting documents at an ergonomic viewing angle. It has a 20 sheet capacity, can be positioned on the left or right, and stores easily out of sight when not needed.

Fully adjustable tilt and swivel for personal viewing comfort. Weighted base provides steady support and stability of copy holder. Includes adjustable clip for different paper sizes. Built-in flexible line guide, pen holder and front page clip. Easel is 13" high by 9.25" wide.