The HDPE Mini Keyboard Tray from KV Waterloo is ideal for situations where storage space for keyboard and mouse is highly restricted. With a width of just 19.4" and depth of 9.4", the tray is capable of accommodating virtually any keyboard. The rigid 0.5" thick tray is formed from HDPE (High Density Polyethylene) which is fully recyclable and features non-slip strips for secure keyboard placement. The included pivoting mousing surface is formed from 0.25" thick phenolic resin and includes a repositionable mouse guard and cable manager. The 9" diameter mousing surface is positioned 1.34" below the keyboard surface can be mounted to the right or left and pivots below the tray for storage. Included with the Mini Keyboard Tray is a removable gel-feel foam palm rest. The Mini Keyboard Tray features a universal mounting pattern for easy attachment to any KV Waterloo keyboard arm.

The compact dimensions of the HDPE Mini Keyboard Tray make it a perfect companion for the Tenor Trackless Keyboard Arm which was designed for the same highly restrictive space limitations. This combination of products offers the ultimate in compact keyboard storage.

HDPE Mini Keyboard Tray Mounting Hole Pattern

The Phenolic Keyboard Tray with Swing-Out Mouse Tray from KV Waterloo lets one create a wide variety of custom configurations for their input devices. The Keyboard Tray portion is 20.5" wide at the front and tapers slightly narrower (20") at the back. A depth of approximately 10" means the tray is large enough to accommodate even the largest keyboards with integrated palmrests. Two anti-skid grip strips are positioned to keep a full-size keyboard secure on the tray surface. The tray ships with a detachable Foam-Gel palm rest which reduces the maximum keyboard depth to 7", still enough space for most standard keyboards.

The detachable mouse tray provides an 8.5" diameter mousing surface and features a unique tilting and rotating pivot mount which can be used to position the mouse tray either level with the keyboard tray or at 0.5", 1.25", 1.5" or 2" above the keyboard tray. The inclination or tilt of the mouse tray can also be adjusted, independent of the keyboard tray orientation, to any angle from all height settings. A repositionable mouse guard with cord clip ensures that the mouse stays in place. The pivot permits the mouse tray to be swung into the position which best meets the ergonomic needs. The range is a full 360° at the highest settings and reduces to 90° as the elevation is lowered to level with the keyboard tray. The mouse tray attaches to the keyboard tray via a clamp mount which can be secured at any point around the edge of the tray, further expanding the customization options as it can be easily reconfigured between left and right positions.Note: The dimensions of the clamp may limit the use of very wide keyboards (such a the Microsoft Natural Ergo Keyboard 4000). As well, with the palm rest installed, the mouse tray mounting clamp must be positioned about 2" further from the body as the palm rest extends the full width of the keyboard tray.

The Under Desk Mouse Tray from Aidata is a convenient storable mousing surface that is easily attached to most desk or table surfaces. The mousing surface sits about 2.2" below the top surface of the desk and at approximately 7.5" in diameter is able to accommodate the space requirements of most conventional mice. The pivoting design means the mouse can be brought out from the desk towards the torso, reducing the need to maintain a forward reach or stretch while using the mouse. This mouse tray can also be of benefit to those who have very limited space for their keyboard by providing an alternate location for the mouse. *For more details on this see the Usage Tips on the Detailed Specifications page.

L'Under Desk Mouse Tray de Aidata est une surface de souris pratique qui se fixe facilement à la plupart des surfaces de bureau ou de table. La surface de la souris se situe à environ 2.2po en dessous de la surface du bureau et, avec un diamètre d'environ 7.5po, elle est capable de répondre aux besoins d'espace de la plupart des souris conventionnelles. Grâce à sa conception pivotante, la souris peut être ramenée du bureau vers le corps, ce qui réduit la nécessité de maintenir une extension vers l'avant ou de s'étirer pendant l'utilisation de la souris. Ce support de souris peut également être utile à ceux qui ont un espace très limité pour leur clavier en fournissant un endroit alternatif pour la souris. *Pour plus de détails, voir les Usage Tips sur la page des spécifications détaillées.

The Harmony Tray from KV Waterloo incorporates a mousing surface which can be pivoted through an arc toward the body on either the left or right side. The mousing surface easily slides to the right or left as required or can even be fully stored beneath the keyboard. Both left and right positions offer eight forward-angled settings which let the mousing surface be moved through an arc towards the torso, positioning it for the most ergonomic benefit. The ease with which the mousing surface can be re-positioned makes this tray a good selection for someone who has limited width for tray storage (with the mousing surface centered for storage the tray is only 23" wide) but who wishes to spread their mouse use between both left and right hands. The roughly 8" by 9" mousing surface will accommodate most mice but may not be suitable for use with some of the more specialized ergonomic mousing solutions with larger footprints as it has a 1/8" ridge along the side and back edges which limits the possible range of mouse movement.

The Harmony Tray has raised rubber anti-skid pads to prevent the keyboard from moving and is only compatible with keyboards at least 15” in width.

The Harmony Tray is thicker than some other trays due to the inclusion of the sliding mousing surface. As a result it does elevate the keyboard higher off the keyboard arm. Individuals who wish to keep the keyboard and mouse as low as possible without interfering with the movement of the legs may wish to consider other options which present a lower profile.

This tray allows easy height, tilt, and swivel positioning of your keyboard. While it does offer both height and tilt adjustment these cannot be adjusted independent of each other, i.e. any adjustment requires resetting of both height and tilt. It includes a full-width leatherette-covered gel palm pad (with anti-microbial protection; 3M model WR340LE) and a 7.25" x 6.25" 3M Precise Optical Mousing Surface (MP200PS) that can be positioned to the left or right. Installation is done without tools in four easy steps, typically in less than 10 minutes. The sliding track is attached via an adhesive strip and the front is secured by hooking the front lip over the desk edge. Also, the keyboard tray is storable, but not fully under the desk (3.0" protrusion); and the tray itself is made of coated MDF (Medium Density Fiber) board.

The Diagonal Big Board Keyboard Tray from Humanscale is designed to be used at corner workstations where the tray needs to be elevated level with or above the desk height. The angled edges at the rear enable the tray to fully clear the edges of the desk when the tray is extended. At 27.5" wide and 11.5" deep, the Diagonal Big Board Tray provides plenty of space for both the keyboard and the mouse. Its symmetrical design allows the mouse to be used comfortably on both the left and right sides. The tray is composed of phenolic, an ultra-strong, remarkably thin (0.25") composite that is non-toxic, durable and easy to clean.

Note: The Diagonal Big Board Keyboard Tray can be mounted to the Ovation Low Profile Leverless Arm from Fox Bay Industries.

The Humanscale 900 Standard Keyboard Tray is a strong, thin phenolic tray that is durable and easy to clean. This 19.0" wide by 10.6" deep tray accommodates most conventional keyboards, has optional removable palm supports in foam or gel (sold separately), and can also accommodate an optional mousing surface for those who require extra space.

Note: This tray is compatible with the Ovation Low Profile Leverless Arm.

At 27" wide, by 10.625" deep, the Big Keyboard Tray from Humanscale provides ample space for safely deploying a full-size keyboard and mouse on a single, level surface. When mounted to a height adjustable keyboard arm the Big Keyboard Tray becomes a versatile height- and angle-adjustable workstation accessory that can accommodate workers of all heights.

The Big Keyboard Tray is composed of .25" thick rigid phenolic resin and is equipped with two foam rubber keyboard gripper strips to position the keyboard securely. Integrated 7" wide by 8.25" deep hard-surfaced mousing zones on the right and left sides of the tray enhance its versatility. Raised ridges with cable retention capabilties edge the sides and back of these surfaces to prevent the mouse from falling off. The front edge of the tray can accommodate either of the optional palm rest accessories.

Note: This tray can be mounted to the Ovation Low Profile Leverless Arm.

The 3M Gel Wrist Rest Platform for Keyboard is designed for those who want to reduce wrist extension (i.e. an upward bend at the hand) with its associated risk of injury to the wrist and forearms. This often occurs when working with a conventional keyboard at a seated or standing workstation. The platform is placed directly on the desk surface to provide a base for the keyboard. The gel wrist rest is secured to the platform in front of the keyboard, providing support beneath the heel of the hands to keep the forearms, wrists and hands in comfortable alignment when typing.

Two sets of optional rubber feet are included, and can be attached to the underside of the platform to create either 5° or 10° of negative tilt for the keyboard to provide further insurance against wrist extension.

At 19.5" wide, the platform and wrist rest accommodate standard keyboards with built-in numeric keypads. The gel-filled wrist rest is 0.25" thick, with leatherette cover. The cover has an embedded anti-microbial treatment that inhibits the growth of bacteria.

Note: We are unable to offer our 30 Day Customer Satisfaction Guarantee on this product.

With a total width of just 19" but a depth of over 12.5", the Diagonal Keyboard Tray from Humanscale is designed to fit in angled corners that are tighter than average. The 15.5" long rear edge angles outward at 45º to get to the full 19" width. The rigid phenolic tray features foam rubber keyboard gripper strips to ensure the keyboard is securely positioned. The tray is also capable of accepting the optional palm support. This keyboard tray can be equipped with an optional swing-out mousing surface to accomodate a traditional mouse but is also deep enough for a central pointing device such as a RollerMouse or Mousetrapper.

Note: This tray is compatible with the Ovation Low Profile Leverless Arm.