The Bild is a multi-monitor mounting system that can be easily configured to meet a wide range of applications. Starting with a dual mount system, it is possible to build almost any multi-monitor system by adding just the components that are needed, making the Bild an easily modifiable mounting option.

The design of the Bild also makes it easy to add, adjust, or remove monitors. Additional beams can be added to the base unit and positioned flat or in an arch for the best viewing angle. Sliding mount cups allow easy positioning of monitors. Also, an optional height adjustable base is available for multi-user workstations where individuals of different heights can set the monitors at their own optimal height.

Desk mounting options include desk clamp, through mount, or rail mount. Beam mounting options include pole mount, static column mount, or motorized column mount. Available in silver or black.

The product components for a Dual Bild with through mount and static column in black are as follows: BILD-2-NM-104 (x1), 8480-16.5-TM-603 (x1).

The product components for a Triple Bild with through mount and static column in black are as follows: BILD-3-NM-104 (x1), 8480-16.5-TM-603 (x1).

The product components for a Quad Bild with through mount and static column in black are as follows: BILD-2-NM-104 (x1), 8470-20-104 (x2), 8477-HQ-104 (x2), 8480-16.5-TM-603 (x1).

For other mount configurations, please call.

The PROXIMA Lateral Monitor Arm is a stylish monitor arm from ErgoVerse that supports a single monitor above the work surface, allowing easy back, forward and sideways articulating motion with a maximum horizontal reach of 18.6" while being elevated at a fixed height up to 15.5" from desk to mid-monitor. The Quick-Release Adapter makes swapping out monitors fast and easy when needed. The monitor tilter offers the versatility of tilting 90° up, 20° down from center, or pivoting from landscape to portrait orientation. In addition, built-in cable management keeps wires neatly clipped around the pole mount. The included mounting options are desk clamp and grommet. The PROXIMA Lateral Monitor Arm supports monitors up to 20 lbs.

The small footprint of the PROXIMA Lateral Monitor Arm makes it ideal for installation on smaller desk surfaces, including standing desk add-ons. Although the PROXIMA Lateral Monitor Arm is available only for single monitors, those who have two monitors (or more) can purchase additional units due to the lower cost of the arm, while also achieving greater freedom in movement and placement of monitors.

Available in black or silver.

Le PROXIMA Lateral Monitor Arm d`ErgoVerse est un bras de moniteur élégant qui suspendra un moniteur au-dessus de la surface de travail, facilitant les mouvements vers l`avant et vers l`arrière tout en étant soulevé à une hauteur fixe allant jusqu'à 15.5po du bureau au milieu du moniteur. En cas de besoin, l`adaptateur de Quick Release facilite le changement entre les moniteurs d`une à l`autre, vite fait. Le monitor tilter offre l`utilisateur la possibilité d`incliner de 90° vers le haut, de 20° vers le bas du milieu, ou de pivoter de l`orientation paysage à l`orientation portrait. De plus, il inclus un canal pour un système de gestion de câbles autour le poteau. Les options de montage incluses sont la pince de bureau et l`œillet. Un accessoire de montage qui va à travers le bureau peut être acheté si nécessaire. Le PROXIMA Lateral Monitor Arm supporte les moniteurs jusqu`à 20 livres.

Grâce à sa petite empreinte, le PROXIMA Lateral Monitor Arm est idéal pour utiliser sur des surfaces de bureaux petits, y compris les bureau assis-debout rétrofit. Bien que le PROXIMA Lateral Monitor Arm ne soit disponible que pour un seul moniteur, ceux qui ont deux moniteurs (ou plus) peuvent acheter des unités supplémentaires en raison du prix bas de ce bras, ce qui offre aux utilisateurs une plus grande liberté de mouvement et de placement des moniteurs.

Disponible en couleurs noir ou gris-argenter.

Mount one or two LCD monitors on the supplied pole with this space-saving mount. Position each monitor independently of the other, and quickly adjust pivot and tilt as your needs change. Set height at any desired position along the included 12" (30.5 cm) or 28" (71.1 cm) pole.

A Universal Mount with 6 mounting options is included. Weight capacity is up to 30 lbs (13.6 kg) per arm and each monitor can adjust independently. The arm is equipped with a 100 mm VESA Quick-Release adapter.

The Long-reach Side-by-Side LCD Mount from Innovative Office Products allows you to position two monitors side by side, independently of each other, in any direction up to 17.5" from the pole. Reposition monitors with the touch of a finger, or adjust height along the pole as needed.

This efficiently designed pole arm allows lateral extension up to 16" (40.6 cm) along a 12" (30.5 cm) or 28" pole which mounts using the versatile Universal FLEXMount. A wide degree of monitor tilt is available (over 200 degrees), including the ability to rotate the monitor from landscape to portrait orientation. Cables are retained using clips on the underside of the arm, keeping them out of view and out of harm's way.

The Adjustable POS Through-Counter Mount from Innovative is a durable mounting system for monitors, signature capture devices, and kiosks. Ideal for retail use, the mount secures the monitor firmly to the counter and allows you to pivot and turn it to any desired angle - and lock it in position if necessary. The mount supports monitors up to 25 lbs in weight and has an adjustable height of 7" - 36" determined by the position of the tube (which runs through the counter in the mount). Also, it has internal cable routing, so that cables pass through the counter in the tube. The mounting mechanism is VESA-monitor compatible - 75 mm & 100 mm adapters included.

NOTE: The Through Mount requires you to drill 4 screws into the mounting surface as opposed to a single central bolt. Bolt Mounting Pattern (9189-24 + 9189-12 are Special Order)

The Adjustable POS Countertop Mount from Innovative combines easy height adjustability with attractive design and durable construction for almost any retail environment. The monitor can be pivoted, turned, or locked into position for no movement. Cables are entirely hidden from view, passing through either the counter or the back exit of the mount. Weight capacity is 25 lbs or less.

Experience the unique, practical and stylish EURO Series of LCD Arms. This LCD Arm features foldable arms which adjust vertically up and down a 12" pole (8" range of vertical adjustment). The arms can fold up to fit in about 3" of space and extend out 14". Various pole lengths and extensions are available or can be designed to fit any application you may be looking for. Unique cable management allows cables to be tucked under the forearm extensions. The Euro Series pole features eight notches at 1" increments which will provide a solid positive connection to position and secure the sliding adjustment clip. This clip prevents the arm extensions from sliding down, securely fastening the extension at the desired height.

Other features include:

• Rotates 360° at three joints
• Monitor tilter mechanism can tilt over 200°
• Adjustable tension at joints - ideal for touch-screen applications

Mount 2 flat panels side by side with this space-saving mount. Position each monitor independently of the other, and quickly adjust pivot and placement as your needs change. Set height at any desired position along the included 12" (30.5 cm) pole. The D-28 model provides a 28" (71.1 cm) pole and will accommodate 4 LCD monitors (creating a 2x2 grid).

A Universal Mount with 6 mounting options is included. This arm provides 200° of rotation at two pivot points and its space saving design allows approximately 3" (7.6 cm) of space behind the monitor. A friction control system provides smooth adjustment while adjusting the position of the arm.

Weight capacity is up to 22 lbs (9.98 kg) per arm and each monitor can adjust independently. The arm is VESA-monitor compatible - 75mm & 100mm VESA adapters included.

This is a LCD mount with a free-standing base - letting you set it up instantly. You can easily adjust the height and angle of the monitor along the 14" pole which extends upward from a heavy duty 10 lb base with a 9.5" x 10.5" footprint. The 90° rotating pivot feature allows you to view the LCD in either landscape or portrait orientation. The dual model positions the monitors one above the other. This stand will support up to a 45 lb monitor. The mount is VESA-monitor compatible - 75mm & 100mm VESA adapters included.