The Ovation provides the largest range of movement of any articulating keyboard arm on the market today (other than sit-stand arms) in a low profile, durable design. It uses a near-effortless patented "Lift-N-Lock" counterbalance mechanism to adjust an attached tray from 7.0" below to a full 3.8" above (17" track version: 5.8" below and 2.6" above) the mounting point. A Height Indicator Gauge makes adjustment easy to measure. The inclination, or "tilt," of the tray can be adjusted from a negative inclination of -15° to +10° using a large Dial-a-Tilt knob that includes an "Inclination Gauge" (allowing accurate repositioning at the desired angle).

The sleek, low profile design provides excellent clearance for the legs and knees. The arm swivels 360° from the track mount for side to side movement. Three track lengths are available. The 17" (8634D17) model can be deployed where mounting space is restricted but has a more limited range of height adjustment and does not permit full storage of trays. The 23" (8624D23) storage track offers the full range of height adjustment and permits full storage of trays up to 11" in depth. To fully store an Extra-Deep (13") or Mouse Intensive Tray underneath the desk, an Extended Track (8624D28) version is also available with all the features of the 8624D23 but equipped with a 28" track. All Ovation models accept all standard trays and use a high quality steel ball-bearing storage track that has a much longer lifespan than a glide track.

Looking for Trays? - see our Tray Category

Le bras Ovation offre une gamme de mouvement la plus grande de n`importe bras articulé disponible dans le marché aujourd`hui (autre que les bras d`asis-debout) avec un conception de profile bas. Il utilise un mécanisme contrebalancer, un breveté "Lift-N-Lock" presque sans effort pour ajuster une tablette attaché de 7 po en dessous jusqu`à 4 po au-dessus (la version du 17 po glissière/track: 6.25 po dessous et 2.15 po au-dessus) le point de montage, et inclus un indicateur d`hauteur. L`inclinaison ou pente peut être ajuster d`une inclinaison négative de -15° jusqu`à +10° en utilisant un grand bouton 'Dial-a-Tilt' qui inclus un indicateur d`inclinaison/pente (qui permet de facilement reprendre l`angle désirable).

La conception élégante de profil bas offre l`espace parfaite pour ne pas frappé les jambes et genoux. Le bras pivot 360° du point de montage pour mouvement de côté à côté. Il y a trois glissières/tracks disponible. Le 17po (8634D17) peut être utiliser quand il n`y a pas beaucoup d`espace, mais il a une gamme limitée pour l`ajustement d`hauteur, et ne range pas la tablette au complet. Le 23po (8624D23) a une gamme pleine d`ajustement pour la hauteur, et permet de ranger au complète les tablettes de 11po en profondeur. Pour ranger au complet une tablette Extra Deep (13po), ou tablette Mouse Intensive dessous le bureau, une glissière plus profond (8624D28) est aussi disponible avec une glissière/track de 28 po. Tous modèles Ovation sont compatible avec les tablettes standards. Ils utilisent une glissière (qui peut être ranger) de haute qualité à billes qui à une vie plus longue que les glissières en plastiques.

Looking for Trays? - see our Tray Category

The Ovation Sit-Stand Keyboard Arm by KV Waterloo offers a range of height adjustments to accommodate sit-stand workstations. Using a patented "Lift N Lock" counterbalance mechanism the arm allows an attached keyboard tray to be positioned at heights ranging from 8.4" above the mounting point to 5.6" below it. The 23" storage track enables most keyboard trays to be fully stored beneath the desk when not in use. The curved neck (see the first image on the Detailed Specifications page for an illustration) allows individuals to be comfortably close to the desk when seated and when standing.

All Ovation Keyboard Arms include a low profile mounting plate for the keyboard tray. The mounting plate is connected to a "Direct Drive" dial tilt mechanism that includes an inclination gauge. By simply turning the dial, and watching the inclination gauge, one can easily set up their workspace to position their keyboard at the preferred inclination, from a positive inclination of +10° to a flat 0° to a negative inclination of -15°.

To view Keyboard Trays, please see our Tray Category

NOTE: On a standard 28.5" high desk (measured from the underside of the desk), the Ovation Sit-Stand Keyboard Arm will provide enough height for proper "standing" positioning of the keyboard tray with no inclination for those under 5'5". For individuals standing between 5’5” and 5’7”, this product can still be suitable but will require a negative inclination on the tray (which brings up the tray worksurface accordingly). This arm is also suitable for individuals under 5’ 7” who are using a “lean-into” seat which puts them in a position between sitting and standing. If negative inclination on the tray is acceptable, those between 5’ 7” and 5’ 10” may also be able to use this product to meet their needs. Taller persons may be accommodated by raising the mounting height through use of products such as the Raise-Its. Of course, monitor elevation must also be considered when moving to a standing position.

The Duet Arm Custom Tray from Fox Bay Industries is 12" deep, features a low profile of just 0.375" and is available in widths of 39", 31", 27" and 23". The ABS Plastic tray is fitted with a 1" Keyboard Guard that has convenient cable routing cutouts on both the left and right. It is otherwise free of any obstructions such as raised edges or built-in wrist rests that could increase the risk of injury to the sensitive pressure points on the underside of the wrists.

The Duet Arm Custom Trays are predrilled to fit both the Duet Sit-Stand Arm and the Duet Sit-Stand Storable Arm from KV Waterloo. When paired with these arms the Duet Custom Trays provide durable deeper-than-average rigid work surface which can provide support for virtually any combination of keyboard and mousing input device. The larger 31" and 39" wide trays can even provide space for additional devices or for notetaking.

Note: The Duet Arm Custom Trays are ONLY for use with Duet Arms from KV Waterloo. Mounting holes are pre-drilled for both arm supports as well as the release trigger. Ensure that the arm width matches the width of tray desired.

The HDPE Mini Keyboard Tray from KV Waterloo is ideal for situations where storage space for keyboard and mouse is highly restricted. With a width of just 19.4" and depth of 9.4", the tray is capable of accommodating virtually any keyboard. The rigid 0.5" thick tray is formed from HDPE (High Density Polyethylene) which is fully recyclable and features non-slip strips for secure keyboard placement. The included pivoting mousing surface is formed from 0.25" thick phenolic resin and includes a repositionable mouse guard and cable manager. The 9" diameter mousing surface is positioned 1.34" below the keyboard surface can be mounted to the right or left and pivots below the tray for storage. Included with the Mini Keyboard Tray is a removable gel-feel foam palm rest. The Mini Keyboard Tray features a universal mounting pattern for easy attachment to any KV Waterloo keyboard arm.

The compact dimensions of the HDPE Mini Keyboard Tray make it a perfect companion for the Tenor Trackless Keyboard Arm which was designed for the same highly restrictive space limitations. This combination of products offers the ultimate in compact keyboard storage.

HDPE Mini Keyboard Tray Mounting Hole Pattern

The Tenor Trackless Keyboard Arm from KV Waterloo was designed to require the minimal amount of undersurface mounting space while still providing storage for keyboard trays up to 9.5" in depth. Requiring just 9.375" of mounting depth, the Tenor Trackless Keyboard Arm features a direct mount which is ideal for situations where there simply is insufficient space to accommodate a traditional track-mount keyboard arm. It will permit full storage of trays up to approximately 9" deep. While 11" deep trays can also be mounted only about the first 9" of depth will be stored (i.e. on an 11" deep about 2" of tray will protrude).

The Tenor Keyboard Arm has all the features of traditional "tracked" arms. Keyboard height and storage are easily accomplished employing a simple "Lift-N-Lock" mechanism and angle adjustment (+10° to -15°) is a simple Dial-A-Tilt. Clearly readable independent gauges behind the tray show the current elevation and angle. Elevation ranges from -1.25" to - 7" below the mounting surface, a full 5.75" of range. The Low Profile head ensures optimal knee and leg clearance at all positions—even when fully stored the arm extends only 5.75" below the mounting point.The arm also features a full 360° swivel mount, offering the potential for full storage of deeper trays by rotating the tray below the desk surface when sufficient clearance exists.

Individuals using sit-stand desks who desire a keyboard arm may find that the direct mount and compact design of the Tenor Trackless Keyboard Arm result in less vibration transfer to their monitors than do traditional tracked arms. As well, the trackless "direct mount" design lends itself to installation on desks with crossbars which would normally render the installation of a tracked keyboard arm impossible.
NOTE: The Tenor Trackless Keyboard arm DOES NOT accommodate the hole pattern of Humanscale Keyboard Trays.