The Ovation Sit-Stand Keyboard Arm by KV Waterloo offers a range of height adjustments to accommodate sit-stand workstations. Using a patented "Lift N Lock" counterbalance mechanism the arm allows an attached keyboard tray to be positioned at heights ranging from 8.4" above the mounting point to 5.6" below it. The 23" storage track enables most keyboard trays to be fully stored beneath the desk when not in use. The curved neck (see the first image on the Detailed Specifications page for an illustration) allows individuals to be comfortably close to the desk when seated and when standing.

All Ovation Keyboard Arms include a low profile mounting plate for the keyboard tray. The mounting plate is connected to a "Direct Drive" dial tilt mechanism that includes an inclination gauge. By simply turning the dial, and watching the inclination gauge, one can easily set up their workspace to position their keyboard at the preferred inclination, from a positive inclination of +10° to a flat 0° to a negative inclination of -15°.

To view Keyboard Trays, please see our Tray Category

NOTE: On a standard 28.5" high desk (measured from the underside of the desk), the Ovation Sit-Stand Keyboard Arm will provide enough height for proper "standing" positioning of the keyboard tray with no inclination for those under 5'5". For individuals standing between 5’5” and 5’7”, this product can still be suitable but will require a negative inclination on the tray (which brings up the tray worksurface accordingly). This arm is also suitable for individuals under 5’ 7” who are using a “lean-into” seat which puts them in a position between sitting and standing. If negative inclination on the tray is acceptable, those between 5’ 7” and 5’ 10” may also be able to use this product to meet their needs. Taller persons may be accommodated by raising the mounting height through use of products such as the Raise-Its. Of course, monitor elevation must also be considered when moving to a standing position.

The DIADEM Return Table Tops from ErgoVerse are intended as companion tops for the DIADEM Waterfall Table Tops. When added to a DIADEM Waterfall Table Top the combination of the two creates a traditional L-shaped desk with a 29" deep primary section and a 23" deep return. The DIADEM Return Table Tops can also serve as a stand-alone desk surface for those with less room. The DIADEM Return Table Tops retain the same focus on functional organic form and distinctive look as do the DIADEM Waterfall Table Tops. Constructed of 1" thick MDF core, these table tops have an elegant waterfall profile and rounded corners that eliminate pinch points and sharp edges. Highly resilient laminate film is then applied to the tops using 3-D lamination technology. This combination of high heat and vacuum wrap the lamination film around the contoured edges, resulting in a fully sealed top. The satin finish laminate film is non-porous, providing protection from spills and the fully sealed contoured edges offer full protection to the MDF core. The undersides of all DIADEM Return Table Tops are finished with melamine to add further protection.

DIADEM Return Table Tops are 23" deep and available in 2 widths (41" and 53"). Both sizes are available in the same 6 colours - 4 luxurious wood grain finishes (Dark Crimson Mahogany, Autumn Harvest Cherry, Light Fresh Maple, and Pristine Sandbank) and 2 solid colours (Black and Grey) as the DIADEM Waterfall Table Tops.

Les DIADEM Return Table Tops d'ErgoVerse sont conçus pour être complémentaires pour les dessus de table DIADEM Waterfall Table Tops. Lorsqu'il est ajouté à un dessus de table DIADEM Waterfall Table Top, la combinaison des deux crée un bureau traditionnel en forme de L avec une section primaire 29po de profondeur et un retour 23po de profondeur. Les DIADEM Return Table Tops peuvent également servir de surface de bureau indépendant pour ceux qui ont moins d'espace. Les DIADEM Return Table Tops conservent le même accent sur la forme fonctionnelle et l'aspect distinctive que les DIADEM Waterfall Table Tops. Ces dessus de table (table top) sont construits de MDF core d'un pouce épais, et sont usinés avec un profil de cascade élégant et des coins arrondis qui éliminent les points de pincement. Un film robuste de stratifiés haute pression est ensuite appliqué sur les dessus de table en utilisant la technologie de laminage en 3-D. Cette combinaison de chaleur élevée et d'enveloppement sous vide le film de laminage autour des coins arrondis, ce qui donne un dessus de table qui est complètement refermé. Le film avec finition satiné laminé est non poreux, offrant une protection contre les déversements et les coins arrondis entièrement refermé offrant une protection complète au MDF core. Les dessous de toute les tables DIADEM Return Table Tops sont finis avec de la mélamine pour ajouter encore plus de protection.

Les DIADEM Return Table Tops sont de 23po de profondeur et sont disponibles en 2 largeurs (41po et 53po). Les deux tailles sont disponibles en 6 couleurs - 4 finitions de grains de bois luxueuses (Acajou foncé, Cerise d'automne, Érable léger, et Pristine Sandbank) ainsi que 2 couleurs solides (Noir et Gris) comme les DIADEM Waterfall Table Tops.

The DIADEM Waterfall Table Tops from ErgoVerse focus on functional organic form while offering a distinctive look to any office setting. Constructed of 1" thick MDF core, these table tops have an elegant waterfall profile and rounded corners that eliminate pinch points and sharp edges. Highly resilient laminate film is then applied to the tops using 3-D lamination technology. This combination of high heat and vacuum wraps the lamination film around the contoured edges, resulting in a fully sealed top. The satin-finish laminate film is non-porous, providing protection from spills and the fully sealed contoured edges offer full protection to the MDF core. The undersides of all DIADEM Waterfall Table Tops are finished with melamine to add further protection. The DIADEM Table Tops offer a uniquely practical and beautifying feature, a softly rounded inner waterfall edge for the dual grommet holes which permits cables to drop gently below the surface without risk of damage from the standard sharp edges.

DIADEM Waterfall Table Tops are 29" deep and available in 4 widths (46", 58", 70" and 82"), with 4 luxurious wood grain finishes (Dark Crimson Mahogany, Autumn Harvest Cherry, Light Fresh Maple, and Pristine Sandbank) as well as 2 solid colours (Black and Grey).

Les DIADEM Waterfall Table Tops d'ErgoVerse se concentrent sur une forme fonctionnelle tout en offrant une allure distinctive à n'importe quel bureaux. Ces dessus de table (table top) ont un centre qui est construit de MDF d'un pouce épais, et sont usinés avec un profil de cascade élégant et des coins arrondis qui éliminent les points de pincement. Un film stratifié très robuste est ensuite appliqué sur les dessus de table en utilisant la technologie de laminage en 3-D. Cette combinaison de chaleur élevée et aspiration enveloppe le film de laminage autour des coins arrondis, ce qui donne un dessus de table qui est complètement refermé. Le film stratifié satiné est non poreux, offrant une protection contre les déversements et les coins arrondis entièrement refermé offrant une protection complète au centre du MDF. Les dessous de toute les tables DIADEM Waterfall Table Tops sont finis avec de la mélamine pour ajouter au protection. Les DIADEM Waterfall Table Tops offrent une fonctionnalité pratique très unique avec une caractéristique très jolie, un bord de cascade intérieure doucement arrondie pour les trous à double oeillet qui permet de laisser tomber doucement les câbles sous la surface sans risque de dommage fait par les bords standard qui sont typiquement pointu.

Les DIADEM Waterfall Table Tops sont de 29po de profondeur et sont disponibles en 4 largeurs (46po, 58po, 70po et 82po). Toutes les tailles sont disponibles en 4 finitions de grains de bois luxueuses (Acajou foncé, Cerise d'automne, Érable léger, et Pristine Sandbank) ainsi que 2 couleurs solides (Noir et Gris).

The Surface Taskmate from HealthPostures facilitates sit/stand stations for non-office, industrial use. It incorporates rugged construction and an easy-to-use, quiet mechanism. The height is adjusted by simply pressing a button. It is small enough to fit on existing workstations and can be customized with accessories so the entire workstation is completely height adjustable. It is also an excellent solution for workstations that are accessed by more than one person. The TaskMate comes fully assembled.

• Reduce neck and back strain
• Ideal for multi-user workstataions
• Holds up to 75 lbs
• Non-slip pads and Velcro attachment for added stability
• Minumum assembly required
• Simple push-button control
• Easy to clean and durable surface

The Taskmate EZ from HealthPostures is available in two models. The Computer Workstation version includes both an adjustable height work surface and monitor mount. The Surface version does not include the monitor mount but can be used as to elevate a laptop for short term use. The Surface version can also serve well as an adjustable assembly or work surface in industrial applications were individuals of varying height may utilize workstations. Taskmate EZ units are equipped by default with a thru-mount that bolts through the surface of the fixed height desk using a single hole. There is also a clamp mount accessory available that can be used to mount the Taskmate EZ to desks no deeper than 24". Both the work surface as well as the monitor height are independently reconfigurable by physically lifting and moving the unit from one notch to another, providing configuration options in 1.5" increments. The monitor can be attached to any of 14 notches in the vertical column, providing a range of height between keyboard tray and the middle of the monitor of a minimum of 13" and a maximum of 31.5".

The Taskmate EZ is capable of supporting up to 50 pounds, and provides the ability to set the monitor (at its midpoint) from 15" to 33" above the mounting surface. The work surface can be positioned from 2" to 20" above the mounting surface when being used with the monitor support and up to 33" above the mounting point when used without a monitor. The work surface provides an 18" deep x 23.5" wide area for the keyboard, mouse and papers. In idustrial settings it can serve to position tools and equipment at a range of heights. The monitor mount will accommodate monitors with either 75mm and 100mm VESA patterns. Some assembly is required (approximately 5-10 minutes).

The Taskmate Executive from HealthPostures is a modification-free way to create a full sit to stand workstation on any standard desk. This ruggedly constructed freestanding metal unit weighs over 50 lbs, sufficient to provide stability through its full range of movement. Height adjustment is via an electric motor that raises and lowers the monitor(s) and keyboard simultaneously. The upper surface can be adjusted to any point between 5.5" and 18.5" above the mounting surface, with the articulating keyboard arm offering its own independent range of adjustment of 5" to 10" below any upper surface height setting.

The Taskmate is relatively compact, with the base requiring only a 15" wide by 21"deep area on the worksurface. The keyboard tray can be cantilevered to 5" below the desk to 13" above the desk. Non slip pads for the base and Velcro are included to attach monitors to the top of the unit for added security. The top platform for the monitor is 30" x 14" with diagonally tapered front corners to accomodate ergonomic positioning of the two included 8.5" x 11" document holders/phone holders. The keyboard tray has an 18" x 9" area for the keyboard with a mousing zone that extends closer to the body. The tray can also be reversed for right or left handed mousing. An optional wrist rest is included with the tray.

The Taskmate Journey from HealthPostures allows one to create a sit to stand workstation on any standard desk. The unit does not need to be affixed to the worksurface, as its rugged construction and weight (50 lbs) is sufficient to provide stability through its full range of movement. The height is adjusted by a simple two way rocking button which effortlessly uses an electric motor to raise and lower the monitor and keyboard simultaneously. The keyboard arm mechanism provides an additional 6" of height adjustment of the keyboard tray.

The Taskmate is relatively compact, with the base requiring only a 14" wide by 21"deep area on the worksurface. The keyboard tray can be cantilevered to 5" below the desk to 13" above the desk. Non slip pads for the base and Velcro are included to attach the LCD or CRT monitor to the top of the unit for added stability. The top platform for the monitor is 11.5" wide x 14" deep while the keyboard tray has an 18" x 9" area for the keyboard with a separate mousing area which extends closer to the torso and can be reversed for right or left handed use. An optional (not recommended) wrist rest is included with the tray.