The KINETIC Sit-Stand Perching Stool is a strikingly elegant and contemporary seating option for a sit-to-stand workstation. The base is engineered to provide a stable, extra wide seating surface for those up to 275 lbs, supported by a gas spring cylinder that provides shock-absorbent comfort through the full range of adjustment (26” to 32”). A convenient 20° swivel to the right or left supports one over a wider radius of movement than a fixed seat could offer.

Semi-Aniline leather or Fabric upholstery with foam underpadding covers the entire extra-wide (19.25” Wide x 8.25 Deep) surface of the seat The aluminum base is powder coated Black or Silver, ensuring that it will fit into any office décor, and has large, reversible plastic glides to suit either hard or carpeted floors.

The LOBAK Perching Seats from ErgoVerse are ideal as temporary perching seats. The short raised back encourages individuals to sit upright on the seat, adopting a posture that encourages correct spinal alignment. The tilt-adjustable seat also offers the option of using the LOBAK as a leaning stool.

The firm polyurethane foam seat is waterproof and highly resistant to cuts or punctures, with raised ridges to encourage air flow for a cooler surface. Height adjustment is accomplished with a gas spring that also serves as a shock absorber by providing a cushioning effect when weight is lowered onto the seat. The angle of the seat is adjustable from 3° to 17° to permit each person to find the position that offers the greatest comfort.

The LOBAK Perching Seat is available in two models. Model 11002 features a locking clamp that secures the seat in an upright position but permits the base to fold up against the seat support for storage. Seat height on the 11002 ranges from 23.2" to 30.7" and is suitable for those of average height. Model 11050 features the same seat on a chromed steel, fixed (non-folding) base. With a seat height range from 24.4" up to 34.6", this model is still suitable for most average height individuals but can also comfortably meet the requirements of those standing up to approximately 6'4".

The LOTAH Perching Comfort Saddle Seat from ErgoVerse is well-suited to applications where work must be performed on surfaces positioned over cabinets or shelves. The LOTAH features a large plush saddle that is straddled. This straddle posture positions the heels behind the bend of the knees, rather than extended forward of the knees as they would be on a leaning stool. (See this image of the Tulean Leaning Stool, also by ErgoVerse, for an illustration of this latter position.) This posture keeps the back in an ergonomically desirable upright orientation, while positioning the torso much closer to flat-fronted work surfaces than is possible with other seating or leaning solutions. As a result, the LOTAH Perching Comfort Saddle Seat helps to reduce the risk of overreach injuries to the muscles of the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. The LOTAH Perching Comfort Saddle Seat also helps to reduce the load borne by the feet and legs for those who work at elevated workstations by transferring the majority of weight onto the seat. As a result overall fatigue is reduced with an accompanying improvement of the ability to maintain focus and concentration.

Built on a heavy tubular steel base with a gas spring that enables a height adjustment range of 24.8" to 31.5", and with a seat that has 15° of tilt range and 3" of cushioning, the LOTAH offers individualized comfort and long-term durability. Rollers built into the rear glides also let the LOTAH moved across hard-surfaced floors with ease.

The MVMNT Foldable Perching Saddle Seat from ErgoVerse is a non-swiveling, folding saddle seat designed for smaller or average sized individuals working at standard or elevated workstations.

The saddle design keeps the toes either in line with the knees (which are splayed and drawn back toward the hips), or even further back - below the hips, rather than extended forward of the knees as they would be on a leaning stool. This makes it possible to work at surfaces built on top of base cabinets or shelves, something that is not possible with traditional chairs (where the knees are too far forward) or leaning/perching seats (where the feet and knees are too far forward). The MVMNT also keeps the torso in an ergonomically desirable upright position, while at the same time providing stability and reducing the need to bend forward from the waist. This posture is especially beneficial when fine control is needed or when greater effort must be exerted. The small back rest offers temporary support for those who like to lean back occasionally to rest their back.

The height of the seat can be adjusted from 20.9" high to 30.7" high. The height of the back rest adjusts independently so individuals are able to position support where it is most needed. The seat and back rest are both padded for comfort and upholstered in black imitation leather for easy cleaning. The MVMNT features a foldaway, adjustable-height, foot-bar to provide a secure base of support when the chair is elevated too high for foot-to-floor contact.

The MVMNT features simple folding hinges, and easy handwheel adjustment of seat, back and footrest heights. The MVMNT is built on a sturdy, rectangular tube steel base that is rated to 264 lbs. Weighing only 18.7 lbs in total, the MVMNT can also be easily transported between venues or job sites.

The NOSTND Perching Comfort PLUS Saddle Seat from ErgoVerse is designed to position the torso and arms as close as possible to a raised workstation, particularly those built on top of base cabinets or shelves. Unlike the seats on a leaning seat or traditional stool, the large plush saddle on the NOSTND is designed to be straddled. Seated posture on the NOSTND is more upright, with the heels positioned behind the bend of the knees, rather than extended forward of the knees as they would be in a leaning position. This posture allows individuals to move in much closer to flat-fronted work surfaces than might otherwise be possible. See this image of the TULEAN Leaning Stool, also from ErgoVerse, for an illustration of this latter position). As a result, the NOSTND Perching Comfort PLUS Saddle Seat helps to reduce the risk of overreach injuries to the shoulders and back, and the risk of injury to the muscles of the sides and mid-section caused by sitting sideways along the base of the workstation and twisting at the waist to get close enough to its surface. By providing a centrally supported seat that bears the upper body weight, the NOSTND also helps to reduce the load generally borne by the feet and legs. Overall fatigue, and the risk of strain on the joints and tissues of the lower limbs can be greatly reduced.

Both the saddle style seat and the large back feature 3" cushioning; and both are height adjustable. The height of the seat can be adjusted between 23.25" and 28.75". The height adjustment range of the back is determined by the seat position. A convenient handle and large rollers on the rear glides let the NOSTND be moved with ease when required. The NOSTND dual rectangular steel tube base is rated to support up to 440 pounds.

If a more traditional style of seat is preferred, the RSTMOR Drafting PLUS Chair, which is also rated to 440 pounds might be a consideration.

Le NOSTND Perching Comfort PLUS Saddle Seat d'ErgoVerse est conçu pour positionner le torse et les bras aussi près que possible d'un poste de travail surélevé, en particulier ceux construits sur des armoires basses ou des étagères. Contrairement aux sièges des chaises inclinés ou des tabourets traditionnels, la grande selle en peluche du NOSTND est conçue pour être chevauchée. La posture assise sur le NOSTND est plus droite, avec les talons positionnés derrière le pliage des genoux, plutôt qu'étendus devant les genoux comme ils le seraient dans une position de s'appuyer contre. Cette posture permet aux individus de se rapprocher des surfaces de travail à front plat plus que cela ne serait possible autrement. (Voir cette image du TULEAN Leaning Stool, également d'ErgoVerse, pour une illustration de cette dernière position). De cette raison, le NOSTND Perching Comfort PLUS Saddle Seat contribue à réduire le risque de blessures aux épaules et au dos dues à l'extension excessive, ainsi que le risque de blessures aux muscles des côtés et de la section médiane causées par le fait de s'asseoir latéralement le long de la base du poste de travail et de se tordre à la taille pour se rapprocher suffisamment de sa surface. En offrant un siège à support central qui supporte le poids du haut du corps, le NOSTND contribue également à réduire la charge généralement supportée par les pieds et les jambes. La fatigue générale et le risque de tension sur les articulations et les tissus des membres inférieurs peuvent être considérablement réduits.

Le siège de style selle aussi que le grand dossier sont dotés d'un rembourrage de 3po et sont tous deux ajustable en hauteur. La hauteur du siège peut être ajusté entre 23.25po et 28.75po. La gamme d'ajustements de la hauteur du dossier est déterminée par la position du siège. Une poignée pratique et de grandes roulettes sur les patins arrière permettent de déplacer facilement le NOSTND lorsque cela est nécessaire. La base à double tube d'acier rectangulaire du NOSTND est conçue pour supporter jusqu'à 440 livres.

Si un style de siège plus traditionnel est préférer, la chaise RSTMOR Drafting PLUS Chair, qui est également conçue pour supporter 440 livres, peut être considérer.

PURE Office Chairs from Interstuhl provide an invigorating seating experience that defies the accepted norms of traditional office seating. This innovative design incorporates movement into every minute of the day, with Smart Spring technology that lets the seat and back rest flex and shift with each change in posture, adapting to the varying needs of each person. When describing the sensation of sitting in a PUREis3 Chair words such as "springy", "bouncy", or "resilient" will immediately come to mind but this is a chair that truly needs to be experienced. The sensation is almost as if the chair is actively increasing energy levels while still providing excellent support.

Unlike many seating options, the flexible back on the PURE Chair focuses on actively encouraging people to re-integrate movement into their workday, even while seated. PURE Chairs accomplish this by flexing, bending and twisting to follow the body's natural movements. Unlike a fixed back rest that remains facing forward at all times, the back rest on the PURE is designed to follow the body, letting individuals instinctively engage in a greater degree of motion as they move. The seat on the Interstuhl PURE is supported on the same fibreglass and polyamid Smart Spring structure as the back rest. This facilitates both forward and side-to-side flexing, providing continuous movement to the hips and lower spine, while also moving dynamically in relation to the back rest.

PURE Chairs are also unusual in that only simple adjustments are necessary - the chair takes care of the rest. Seat height ranges between 19.0" and 23.25", the back rest can lock at 90° in relation to the seat, and the 3-D T Arm Rests offer height, width, and depth adjustments. The need for other common adjustments is taken care of by the PURE design.

The most comfortable and beneficial way to use the PURE Chair is to leave the back rest unlocked to follow every movement. For situations where a more traditional posture is desired the back rest can also be locked into a fixed upright position in relation to the seat. However, even in this position the back rest retains a full range of flex and the dynamic seat movement remains unchanged, offering continuous movement.

Both models of the PUREis3 Chair have a padded seat upholstered in Black Lucia Fabric. This model, the PU113 Series, features the backrest covered in the same Black Lucia fabric with a light padding - a combination that results in a slightly higher resistance to flex in the back rest. For individuals of lighter build who are seeking to maximize the movement and flexion of the back support, the PU213 Series is noticeably more flexible as there is no upholstery to deaden or mute the movement of the frame. The mesh back not only permits the maximum degree of flex it also provides a greater degree of air flow. Both models are exceptionally comfortable.

PURE Office Chairs d'Interstuhl offrent une expérience d'assise énergisante qui défie les normes acceptées des sièges de bureau traditionnels. La conception innovante intègre le mouvement dans chaque minute de la journée, grâce à la technologie Smart Spring qui permet à l'assise et au dossier de plier et de se déplacer avec chaque changement de posture, s'adaptant ainsi aux besoins variables de chaque personne. Lorsque l'on décrit la sensation de s'asseoir dans une chaise PUREis3, des mots tels que "élastique", "rebondissant" ou "résilient" viennent immédiatement en tête. Mais c'est vraiment une chaise qui doit être vécu pour le ressentir. La sensation est presque celle d'une chaise qui augmente activement les niveaux d'énergie tout en offrant un excellent soutien.

Contrairement à de nombreuses options de siège, le dossier flexible du PURE Chair vise à encourager activement les gens à réintégrer le mouvement dans leur journée de travail, même en position assise. Les PURE Chairs y parviennent en se pliant et se tordant pour suivre les mouvements naturels du corps. Contrairement à un dossier fixe qui reste toujours tourné vers l'avant, le dossier de la chaise PURE est conçu pour suivre le corps, ce qui permet aux individus de s'engager instinctivement dans un plus grand degré de mouvement lorsqu'ils se déplacent. Le siège sur le Pure d'Interstuhl est soutenue par la même structure Smart Spring en fibre de verre et polyamide que le dossier. Cela facilite la flexion vers l'avant et d'un côté à l'autre, offrant un mouvement continu aux hanches et au bas de la colonne vertébrale, tout en se déplaçant de manière dynamique par rapport au dossier.

Les chaises PURE sont également inhabituelles dans la mesure où seuls des ajustements simples sont nécessaires - la chaise s'occupe du reste. La hauteur de l'assise varie entre 19po et 23.25po, le dossier peut se verrouiller à 90° par rapport à l'assise et les accoudoirs en 3-D T sont ajustable en hauteur, largeur et profondeur. Les autres ajustements communs sont tenu compte par la conception PURE.

La façon la plus confortable et la plus bénéfique d'utiliser la chaise PURE est de laisser le dossier déverrouillé pour suivre chaque mouvement. Pour les situations où une posture plus traditionnelle est souhaitée, le dossier peut également être verrouillé dans une position verticale fixe par rapport au siège. Cependant, même dans cette position, le dossier conserve toute sa souplesse et le mouvement dynamique de l'assise reste inchangé, offrant ainsi un mouvement continu.

Les deux modèles de la PUREis3 Chair sont dotés d'une assise rembourrée, revêtue de tissu Black Lucia. Ce modèle, la série PU113, présente un dossier recouvert du même tissu Black Lucia avec un léger rembourrage - une combinaison qui se traduit par une résistance légèrement supérieure à la flexion du dossier. Pour les personnes plus léger qui cherchent à maximiser le mouvement et la flexion du support dossier, le PU213 Series est beaucoup plus flexible, car il n'y a pas de rembourrage pour atténuer le mouvement de la structure. Le dossier en mesh permet non seulement un degré de flexion maximal, mais aussi une meilleure circulation de l'air. Les deux modèles sont exceptionnellement confortables.

PURE Office Chairs from Interstuhl provide an invigorating seating experience that defies the accepted norms of traditional office seating. This innovative design incorporates movement into every minute of the day, with Smart Spring technology that lets the seat and back rest flex and shift with each change in posture, adapting to the varying needs of each person. When describing the sensation of sitting in a PUREis3 Chair words such as "springy", "bouncy", or "resilient" will immediately come to mind but this is a chair that truly needs to be experienced. The sensation is almost as if the chair is actively increasing energy levels while still providing excellent support.

Unlike many seating options, the flexible back on the PURE Chair focuses on actively encouraging people to re-integrate movement into their workday, even while seated. PURE Chairs accomplish this by flexing, bending and twisting to follow the body's natural movements. Unlike a fixed back rest that remains facing forward at all times, the back rest on the PURE is designed to follow the body, letting individuals instinctively engage in a greater degree of motion as they move. The seat on the Interstuhl PURE is supported on the same fibreglass and polyamid Smart Spring structure as the back rest. This facilitates both forward and side-to-side flexing, providing continuous movement to the hips and lower spine, while also moving dynamically in relation to the back rest.

PURE Chairs are also unusual in that only simple adjustments are necessary - the chair takes care of the rest. Seat height ranges between 19.0" and 23.25", the back rest can lock at 90° in relation to the seat, and the 3-D T Arm Rests offer height, width, and depth adjustments. The need for other common adjustments is taken care of by the PURE design.

The most comfortable and beneficial way to use the PURE Chair is to leave the back rest unlocked to follow every movement. For situations where a more traditional posture is desired the back rest can also be locked into a fixed upright position in relation to the seat. However, even in this position the back rest retains a full range of flex and the dynamic seat movement remains unchanged, offering continuous movement.

Both models of the PUREis3 Chair have a padded seat upholstered in Black Lucia Fabric. This model, the PU213 Series, features an open mesh back that permits the maximum degree of flex as well as a greater degree of air flow. The other model, the PU113 Series, has the back rest covered in Black Lucia fabric with a light padding - a combination that results in a slightly higher resistance to flex in the back rest. Both models are exceptionally comfortable.

PURE Office Chairs d'Interstuhl offrent une expérience d'assise énergisante qui défie les normes acceptées des sièges de bureau traditionnels. La conception innovante intègre le mouvement dans chaque minute de la journée, grâce à la technologie Smart Spring qui permet à l'assise et au dossier de plier et de se déplacer avec chaque changement de posture, s'adaptant ainsi aux besoins variables de chaque personne. Lorsque l'on décrit la sensation de s'asseoir dans une chaise PUREis3, des mots tels que "élastique", "rebondissant" ou "résilient" viennent immédiatement en tête. Mais c'est vraiment une chaise qui doit être vécu pour le ressentir. La sensation est presque celle d'une chaise qui augmente activement les niveaux d'énergie tout en offrant un excellent soutien.

Contrairement à de nombreuses options de siège, le dossier flexible du PURE Chair vise à encourager activement les gens à réintégrer le mouvement dans leur journée de travail, même en position assise. Les PURE Chairs y parviennent en se pliant et se tordant pour suivre les mouvements naturels du corps. Contrairement à un dossier fixe qui reste toujours tourné vers l'avant, le dossier de la chaise PURE est conçu pour suivre le corps, ce qui permet aux individus de s'engager instinctivement dans un plus grand degré de mouvement lorsqu'ils se déplacent. Le siège sur le Pure d'Interstuhl est soutenue par la même structure Smart Spring en fibre de verre et polyamide que le dossier. Cela facilite la flexion vers l'avant et d'un côté à l'autre, offrant un mouvement continu aux hanches et au bas de la colonne vertébrale, tout en se déplaçant de manière dynamique par rapport au dossier.

Les chaises PURE sont également inhabituelles dans la mesure où seuls des ajustements simples sont nécessaires - la chaise s'occupe du reste. La hauteur de l'assise varie entre 19po et 23.25po, le dossier peut se verrouiller à 90° par rapport à l'assise et les accoudoirs en 3-D T sont ajustable en hauteur, largeur et profondeur. Les autres ajustements communs sont tenu compte par la conception PURE.

La façon la plus confortable et la plus bénéfique d'utiliser la chaise PURE est de laisser le dossier déverrouillé pour suivre chaque mouvement. Pour les situations où une posture plus traditionnelle est souhaitée, le dossier peut également être verrouillé dans une position verticale fixe par rapport au siège. Cependant, même dans cette position, le dossier conserve toute sa souplesse et le mouvement dynamique de l'assise reste inchangé, offrant ainsi un mouvement continu.

Les deux modèles de la PUREis3 Chair sont dotés d'une assise rembourrée, revêtue de tissu Black Lucia. Ce modèle, la série PU213, présente un dossier en matériau à maille ouverte, ce qui permet une meilleure circulation de l'air, aussi qu'une flexibilité maximale. L'autre modèle, le PU113 Series , présente un dossier recouvert de tissu Black Lucia avec un léger rembourrage - une combinaison qui se traduit par une résistance légèrement supérieure à la flexion du dossier. Les deux modèles sont exceptionnellement confortables.

The PYRCH Saddle Seat from ErgoVerse encourages the adoption of a partially elevated upright stance that encourages more upper body activity, better and deeper breathing, and improved overall blood flow. This type of posture offers a greater range of reach and can also lead to a higher degree of alertness. The upright position also makes it easy to return to a fully standing position, reducing stress on the knees.

When seated on the PYRCH Saddle Seat, the legs are positioned in a wider stance than is possible on a leaning stool or standard chair. Because the saddle can be elevated to any height between 26" and 35.8" it can serve the needs of a wide range of individuals, even those working at elevated workstations. The saddle can also be tilted forward up to 15° and offers a full 360° of free rotation. This capacity for full rotation makes the PYRCH a practical solution for workers who may need to swivel between different work surfaces when accessing parts or equipment. When the seat pan is tilted the PYRCH can also provide a limited degree of leaning capability. The robust black tubular steel base provides strength and stability, with strong nylon glides that ensure secure positioning.

Note: Sitting on a saddle stool elevates the torso higher than a standard seat. Saddle stools are therefore not generally recommended as a replacement for seating at a standard office desk. Please call one of our Product Specialists to discuss your intended use of the PYRCH Saddle Seat. We will be happy to help you find the best solution for your needs.

The RISON Leaning Stools from ErgoVerse offer the options of sitting or leaning throughout the workday. The non-vertical, or leaning, stance effectively reduces the weight load on the joints of both the legs and the feet as the stool, rather than the legs and feet, becomes the load bearing support. The upright position also significantly reduces the effort required to return to a fully standing position. The shock absorbing effect of the gas spring provides additional comfort when weight is brought to bear on the seat.

The fixed seat offers an infinitely adjustable height range via the gas spring and a forward-locking tilt adjustment ranging from 5° to 20°. The durable self-sealed polyurethane seat is easily cleaned and provides a firm yet cushioned seating surface with raised texture bumps for improved comfort. Model RLS-B-11120 also features a firm polyurethane back support with independent angle adjustment to ensure that a comfortable upright posture can be maintained regardless of the chosen seat angle.
Note: The back on the RLS-B-11120 has a 2.5" deep curvature in the middle, is 14" wide, and has firm edges. Those with broader frames may find the back on this model too narrow and deep for a comfortable fit. The EZSIT Leaning Stool features a broader back better suited to those of broader build.

The heavy-duty textured black tubular steel base on the RISON Leaning Stool is designed for industrial settings but functions well in many offices, providing strength and stability. Strong nylon glides engage the floor to ensure firm positioning of the seat and the incorporated rollers permit the chair to be easily moved between workstations. The unique design of the base maximizes stability while greatly reducing the risk of tripping for passersby.

Two different cylinder options are available on the RISON so that there is a RISON which is the right height range for everybody. Most will be able to take advantage of models RLS-11113 and RLS-B-11120 (back version) that offer a seat height adjustable from 26" - 35.5" and are suited to heights from about 5'2" up to 6'6". The model RLS-S-11130 is intended for shorter individuals and should accommodate those of heights ranging from 4'5" to 5'5".

The RSTMOR Drafting PLUS Chair from ErgoVerse is specifically designed to meet the needs of those of larger build. Dual rectangular steel tube construction rated to support up to 440 pounds and extra-thick padding on the larger-than-average seat are combined with easy adjustability to create a chair that is both functional and durable. The RSTMOR chair also offers individuals the option of sitting at a greater height than traditional chairs, which can significantly reduce the stress to which the knees are subjected with repetitive sitting and standing from a standard chair height. An adjustable footrest provides relaxation for the feet and lower legs, especially convenient if working at a raised counter that requires a greater seat elevation. For individuals who are working in a warehouse or assembly environment with raised counters this seat can enable them to reduce the load on their legs and joints by letting them sit while still being able to reach the work surface. The chair also folds for storage.